Emerald Cut Diamond
Emerald Cut Diamond
Emerald Cut Diamond Emerald Cut Diamond

The emerald cut diamond, in its most recognised form, as shown here, will have a greater length than its width, we refer to this as its ratio. The length and width in this type of diamond can vary significantly from diamond to diamond with many options available.

Very careful selection is required as this cut type is very un-forgiving of bad shape and poor symmetry. It is also often easy to see inclusions within the diamond if the grade is too low. Generally we would suggest not less that VS grade in clarity for an emerald cut, although just selection an arbitrary grade in any diamond is not as easy as it sounds, extreme care needs to be taken selecting this cut type.

This image show a 0.75 D/VVS2, GIA certified,  a client order with very good polish and symmetry.

This is the diamond used in E9696

Make an enquiry,  it costs nothing to ask.   ellissi

Style No.: Emerald Cut

The diamond grades we recommend range from D to G in colour and SI1 - VS1 in clarity. ( Deciding diamond grades ).
It is critical to have sound advice in choosing the right diamond. We provide expert assistance to help you in your selection. Ask Ellissi

Diamonds weighing 0.50 ct or over are accompanied with certification from the Gemological Institute of America (GIA). Diamonds ranging in size from 0.20 ct - 0.49 ct can also be certified. GIA Certification

In addition to the GIA certification, all our diamond rings are accompanied with a full independent Valuation by a valuer registered with the National Council of Jewellery Valuers. This is an impartial assessment of the quality of the diamonds and ring. This NCJV document provides you with a figure for the retail replacement value of the ring for insurance purposes, it is also an independent third party assessment of the ring.